起草口位置解决方案,我强行与岳的性关系,免费行情9.1不用下载,《扒开让我蜜桃视频.》新鲜出炉

Home>Product>Axial fan

Model T40 axial flow fan
Product category：Axial fan

Product introduction

T40 type axial flow fan Application:

Used in factories, warehouses, offices, residential ventilation or strengthen the heating heat dissipation. If the casing is removed, it can be used as a fan. It can also be installed in series at intervals in the longer exhaust pipe to increase the wind pressure in the pipe. The gas passing through the fan shall be non-flammable, non-explosive, non-corrosive, non-viscous substances and significant dust, and its temperature shall not exceed 45℃.

T40 type axial flow fan structure:

T40 type axial flow fan is composed of impeller, housing and air collector.

1, impeller part: composed of blade, hub, blade is arc plate, made of thin steel plate stamping, according to the required installation of fillet welding on the hub outer circle.

2. Air collector part: In order to reduce the loss of air flow into the mouth, the air collector is made of circular arc streamline, which is formed by thin steel plate stamping or spinning machine.

3. Shell part: composed of air duct, base and support plate, etc., all made of thin steel plate and profile. The air duct is straight cylindrical, and there is a certain gap between the impeller and the air duct.

T40 axial flow fan type:

The air efficiency of the T40 axial flow fan is increased from 67% to 84% and the strength at the blade root is enhanced because the airfoil of the original 30K4 fan is modified and the new cylindrical hub structure is adopted. T40 type axial flow fan products are divided into ten machine numbers according to different impeller diameters, which are ranked №2.5, 3, 3.5, 4, 5, 6, 7, 8, 9, 10. Each type of machine blade can be installed into 15°, 20°, 25°, 30°, 35° five angles. Due to the differences in impeller diameter, blade installation Angle, spindle speed, etc., the air volume, wind pressure and power consumption are also different. The wind pressure is from 31Pa to 473Pa, and the air volume is from 564m3/h to 48200m3/h. This series of products are directly mounted on the motor impeller directly connected structure, in the impeller circumference speed does not exceed 60m/s with three kinds of revolutions: 2900r/min, 1450 r/min, 960 r/min. Facing the direction of the air inlet, the impeller rotates counterclockwise.

機號	轉速	葉片數量	角度	全壓	風量	軸功率	電動機
	r/min	（個）	（°）	Pa	m3/h	KW	型號	功率KW
2.5	2900	4	15	125	1130	0.0578	AO25612	0.09
			20	138	1451	0.0783	AO25612	0.09
			25	140	1861	0.0992	AO25622	0.12
			30	149	2009	0.1145	AO25622	0.12
			35	184	2272	0.1657	AO26312	0.18
	1450	4	15	31	565	0.0072	JWO6B-4	0.025
			20	34	724	0.0098
			25	35	932	0.0124
			30	37	1012	0.0143
			35	46	1141	0.0207
3	2900	4	15	180	1951	0.144	AO26312	0.18
			20	199	2498	0.195	AO26322	0.25
			25	202	3218	0.247	AO26322	0.25
			30	215	3481	0.285	AO27112	0.37
			35	266	3931	0.413	AO27122	0.55
	1450	4	15	45	976	0.018	AO25624	0.09
			20	50	1249	0.0244
			25	51	1609	0.0308
			30	54	1739	0.0356
			35	67	1958	0.0516
3.5	2900	4	15	245	3100	0.311	AO27112	0.37
			20	272	3971	0.422	AO27122	0.55
			25	274	5119	0.533	AO27122	0.55
			30	292	5519	0.615	AO28012	0.75
			35	363	6239	0.892	Y802-2	1.1
	1450	4	15	62	1552	0.0389	AO25614	0.06
			20	68	1980	0.0528	AO25614	0.06
			25	69	2560	0.0666	AO25624	0.09
			30	74	2761	0.0769	AO25624	0.09
			35	90	3121	0.1113	AO26314	0.12
4	2900	4	15	321	4630	0.605	Y802-2	1.1
			20	355	5918	0.822	Y802-2	1.1
			25	359	7639	1.039	Y802-2	1.1
			30	382	8240	1.2	Y90S-2	1.5
			35	473	9310	1.732	Y90L-2	2.2
	1450	4	15	80	2318	0.0756	AO27114	0.25
			20	88	2959	0.1027
			25	90	3820	0.1299
			30	95	4118	0.15
			35	119	4658	0.2168
5	1450	4	15	125	4522	0.231	Y802-4	0.75
			20	138	5789	0.314
			25	140	7448	0.396
			30	149	8050	0.457
			35	184	9090	0.662
	960	4	15	54	2992	0.0669	90S-6	0.25
			20	61	3830	0.0909
			25	62	4939	0.1149
			30	66	5332	0.1327
			35	81	6019	0.192
6	1450	4	15	180	7808	0.575	Y90S-4	1.1
			20	200	9990	0.78	Y90S-4	1.1
			25	202	12899	0.986
			30	215	13900	1.138	Y90L-4	1.5
			35	267	15700	1.65	Y100L1-4	2.2
	960	4	15	79	5159	0.167	Y90S-6	0.75
			20	87	6610	0.227
			25	88	8510	0.286
			30	94	9202	0.331
			35	117	10400	0.476
7	1450	4	15	245	12398	1.24	Y90L-4	1.5
			20	272	15901	1.69	Y90L-4	1.5
			25	274	20498	2.13	Y100L1-4	2.2
			30	294	22100	2.47	Y100L2-4	3
			35	363	24998	3.57	Y112M-4	4
	960	4	15	108	8201	0.36	Y90S-6	0.75
			20	119	10501	0.49
			25	121	13500	0.619
			30	128	14602	0.715
			35	159	16494	1.034	Y90L-6	1.1
8	1450	4	15	321	18500	2.43	Y100L2-4	3
			20	355	23699	3.29	Y112-4	4
			25	359	30499	4.16
			30	381	33001	4.81	Y132S-4	5.5
			35	473	37520	6.96	Y132M-4	7.5
	960	4	15	140	12301	0.703
			20	156	15700	0.954	Y90L-6	1.1
			25	158	20200	1.21
			30	168	21812	1.4	Y100L-6	1.5
			35	208	24700	2.02	Y112M-6	2.2
9	960	4	15	177	17399	1.27	Y100L-6	1.5
			20	197	22298	1.72	Y112M-6	2.2
			25	199	28699	2.18	Y132S-6	3
			30	212	31100	2.51
			35	263	31500	3.64	Y132M1-6	4
10	960	4	15	220	24001	2.15	Y112M-6	2.2
			20	243	30701	2.91	Y132S-6	3
			25	246	39337	3.68	Y132M1-6	4
			30	262	42700	4.26	Y132M2-6	5.5
			35	323	48200	6.15	Y160M2-6	7.5